Hello I decided to push through and make the final upgrades for my cnc router. I would like to use it to machine a part for mounting a quick change tool post for my emcoturn and later a turret.
in this video I make a linear rail slide upgrade for my y axis. exchanging the old supported rods against hgr25 rail and hgh25 rail blocks.
First try to square two long aluminium pieces to which I mount the rails. It was alot of job since the aluminium were 700 mm and I Only got ~200mm of travel on my minimill.
I then drilled and tapped mounted and aligned the rails.
Hopefully I can have booth the router and lathe running next week.
Related Post:
- Upgrading my CNC Router from Round Linear Rails to HIWIN Square Rails
- #31 Assembling Aluminium CNC Machine #31 / MGN12 Linear Rails / XYZ Axis / Spindle Mount
- Alignment attempt (linear rails 6040 upgrade) (Linear rail upgrade part 6)
- DIY CNC Router – Part 2 Linear Rails
- Alignment attempt (linear rails 6040 upgrade)
- CNC Myford: Linear Rails, Solid Toolpost & Demonstration
- 5 x 10 Plasma / Router Table Build – Part 3 – Linear Rails Mounted
- DIY CNC Router: First Movements and Other Projects
- #43 MOOT_ONE / CNC Linear Motion Actuator – SFU1605 – HGR15 Rail Guide
- INTRO TO LINEAR GUIDES – LINEAR MOTION #1 | MECH MINUTES | MISUMI USA