In this video I assemble the X Axis linear actuator for the latest rendition of the CNC machine. It uses larger HGR15 rails and two thicknesses of Valchromat plates. I’m actually going to recreate the machine you’ll see at the end, as a smaller 600×600 rail model which I’ll replace the current smaller one – and in the process write the manual. The manual has been something I’ve mentioned on and off several time but each time I took a step forward I noticed something which prevented me from committing the design in writing. But this is the one… again.
00:00 – Intro
00:31 – HGR15 Linear Rails
01:07 – Different Rail Block
02:59 – Parts For Assembly
03:42 – X Carriage Plate
04:25 – The Important Bit
07:04 – Rail Aligning Process
08:09 – Checking
09:15 – Conclusion
Subscribe: https://goo.gl/FmlHU7
Patreon: https://www.patreon.com/EducatingSavvas
Photos: http://instagram.com/savvas_papasavva
Main Channel: http://www.youtube.com/SavvasPapasavva
Website: http://www.miscpro.com
#EducatingSavvas #DIYcnc #DesktopCNC #MootOneCNC
Related Post:
- SBR16 SBR20 linear rail set + 3 ballscrew SFU1605+BK/BF12 + nut housing + couplers+SBR blocks for
- Alignment attempt (linear rails 6040 upgrade) (Linear rail upgrade part 6)
- INTRO TO LINEAR GUIDES – LINEAR MOTION #1 | MECH MINUTES | MISUMI USA
- #29 MGN12 Linear Rail Guide #29 / Dial Gauge Jig / Improving Movement / Butting Rails
- #29 Linear Sliding Rail Guide #29 / MGN12 / Dial Gauge Jig / Improving Movement / Butting Rails
- #31 Assembling Aluminium CNC Machine #31 / MGN12 Linear Rails / XYZ Axis / Spindle Mount
- CNC Myford: Linear Rails, Solid Toolpost & Demonstration
- DIY CNC Router – Part 2 Linear Rails
- Mounting hgr25 linear rails for my 6040 cnc router y axis
- Upgrading my CNC Router from Round Linear Rails to HIWIN Square Rails
