How to Use the INA219 Featherwing in DK IoT Studio – Maker.io Tutorial | Digi-Key Electronics

How to Use the INA219 Featherwing in DK IoT Studio – Maker.io Tutorial | Digi-Key Electronics

The ability to monitor power levels and consumption is key to power supply or energy collection system efficiency and control. In this tutorial, Robin explains how to set up the Adafruit Industries INA219 Featherwing power monitoring development board in Digi-Key’s DK IoT Studio using the proper element and linking configurations to deliver data via I2C communication to an Adafruit Huzzah32. Physical connection of the Featherwing to the Huzzah32 is also explained.

Additional Resources:

Adafruit Huzzah32 development board – https://www.digikey.com/short/p0bjzh

Adafruit INA219 Featherwing – https://www.digikey.com/short/p1ph22

Maker.io – https://www.digikey.com/en/maker

Digi-Key’s Blog – TheCircuit https://www.digikey.com/en/blog

Connect with Digi-Key on Facebook https://www.facebook.com/digikey.electronics/

And follow us on Twitter https://twitter.com/digikey

DK IoT Studio https://www.digikey.com/en/resources/design-tools/dk-iot-studio

Related Post: